jam center snacks processing line

Series of double extruder are consisting of feeding system, extruding system, cutting system, heating system, gearing system and controlling system.

Consists of feeding system, extruding system and cutting system, adopt frequency speed-controlling with high automation, stable operation and power saving mode.

Automatic lubrication, cooling, to guarantee the extruder running safely and extend its life.

According to different material, to design the relative single or double screw feeding system, the material should be uniformity and stable.

Screw uses alloy material, it is made by special technique, is able to bear grinding, steady and reliable, longer using life.

According to different product requirements,different screw design rate to full different technology request.

Technical Parameter:Model:LT70L;/Output:220-260kg/hr; Energy consumption:28KW;/Main Power:;

Production:Corn flakes,Breakfast Cereals,Snack Food,Jam Center Food, Extrusion bread, Corn triangles. Salad,Nutritional Powder, Breadcrumbs, Pet Food,Instant Rice.

LU3

Metal Plate Process Flow

1.Design personnel design and draw the metal plate part drawing.(three view)

2.Review the drawing in many ways to avoid if there is a design flaw.

3.According to the three-view draw expanding the parts as a tablet, Calculating the baiting size required.

4.Professional use of guillotine cutting length and width dimensions of the display in figure, If there are punching, cutting Angle, to punch combination of punching mold,cutting angle shapes.

5.Processed the tablet into the required shape by using a folding bed.

6.Generally adopt argon arc welding compounding the multiple parts into the required shapes to achieve the purpose of processing.

7.Perfect the last processing and stainless steel material commonly used polishing, wire drawing, acid pickling, phosphating, passivation ect. to beautify processing.

Rivet Weld Process Flow

1.Design personnel design and draw the frame parts drawing.(three view)

2.Review the drawing in many ways to avoid if there is a design flaw.

3.According to the three-view draw splitting the model, size, quantity of each steel.

4.Use professional baiting tool cutting raw materials according to the type, size of steel then removing the burrs.

5.Welding personnel use welding or co2 to protect welding point forming.

6.Forming the joint of shaped frame material welding and reducing to a minimum welding deformation.

7.Processing the welding parts by using professional tools.( For example: Oil removal, rust removal, the coating or spray paint etc.)